Hi there!

For over 30 years, we have developed and produced passive components for fiber optic networks, and everything we do at Micos Telcom is designed to provide efficient, simple and innovated solutions for complicated tasks. Today, we would like to think of the 2020 Bestsellers to inspire you for a future project.

1st Place: ORM 1

The Fiber Access Terminal Box ORM 1 is designed to terminate an optical network using 2 to 4 optical fibers at a customer terminal point. It is installed indoors on a wall.

• Capacity of up to 4 Optical Connectors
• Connector holder SC simplex or LC duplex
• Attractive design 

>>> Discover Attractive Design of ORM 1

2nd Place: ORM 2

The Fiber Access Terminal Box ORM 2 is designed to terminate 2 to 4 optical fibers at a customer terminal point or interconnect Fiber Optic Cables. It is installed indoors on a wall. Inputs and outputs can vary by used panels.

• Capacity of up to 4 Optical Connectors
• Connector holder: SC simplex, SC duplex, ST, FC, E2000 or LC
• Easy assembly

>>> Discover ORM 2 for Easy Assembly

1st Place: ORM 5

The lockable Wall-Mounted Fiber Optic Box ORM 5 is designed for indoor / outdoor installation on a wall at customers’ premises. The box is suitable for FTTH networks to terminate optical fibres mainly in suburban areas with lower household density. Additionally, the box can be used as a floor distribution box in MDUs.

• Simple installation
• Easy access 
• Optional lockable cover

>>> Discover ORM 5 for Simple Installation

2nd Place: MTeH EASY

The Fiber Optic Box MTeH EASY is designed as a simple box for indoor installation. It supports especially FTTH networks. It can be used for storage of a pre-connectorized cable or blown cable reserves, which can be spliced when connecting a customer. It can also be used as a main distribution box in smaller buildings or as a floor distribution box in MDUs.

• Easy installation
• Possibility to use both for splicing and termination of connectors
• Capacity of up to 6× SC duplex or 6× LC quad

>>> Discover MTeH EASY for Splicing and Termination of Connectors

1st Place: ORU 3 SIS

The Fiber Distribution Hub ORU 3 SIS is designed as a multi-purpose pillar with a hinged rack to assemble up to 24 SAFeTNET modules (for terminating or interconnecting Fiber Optic Cables blown in Microducts or HDPE Tubes). It can be used indoors or outdoors. 

• Capacity of up to 864 optical splices
• Significant space for optical reserves
• Wide variety of heights

>>> Discover ORU 3 SIS with Wide Variety of Heights

2nd Place: ORU 1 SDF SIS

The Fiber Distribution Hub ORU 1 SDF SIS is designed as a splitter concentrator pillar with a hinged rack to assemble up to 5 SAFeTNET modules (for terminating or interconnecting Fiber Optic Cables blown in Microducts or HDPE Tubes). It can be used indoors or outdoors.

• Capacity of up to 144 optical splices
• Capacity of up to 48× SC simplex or LC duplex Optical Adapter
• Significant space for optical reserves

>>> Discover ORU 1 SDF SIS with Significant Space for Optical Reserves

1st Place: ORMP 1U

The Draw-Out-Type Fiber Optic Patch Panel ORMP 1U is designed to store up to 48 SC or 96 LC Optical Connectors. Its design enables installation into a 19” rack.

• Storage of optical reserves
• Easy assembly
• Possibility to fit the panel with PG Grommets

>>> Discover ORMP 1U with Capacity of up to 48 SC or 96 LC Optical Connectors

2nd Place: ORMPV 1U 19″

The Fiber Optic Patch Panel ORMPV 1U 19″ is designed to store up to 48 SC or 48 LC Optical Connectors. Its design enables installation into a 19” rack.

• Storage of optical reserves
• Connector holder: SC, ST, FC, E2000, LC or SC DUPLEX
• Cable entrance from the back or the side

>>> Discover ORMPV 1U 19″ with Capacity of up to 48 SC or 48 LC Optical Connectors

1st Place: KM 4

The Fiber Optic Tray KM 4 is designed for up to 24 fibers. It can be used separately putting on a mandrel or in the FibeRoad^TM System. Various Splice Holders can be selected for the tray. It is compatible with all types of fibers and very comfortable for users.

• Without need to measure fibers before splicing
• Possibility of a PLC Splitter placement (small format)
• The FibeRoad^TM System

>>> Discover KM 4 with Capacity of up to 24 Splices

2nd Place: KM 1

• Possibility to store up to 12 splices
• Possibility of a packet assembly
• Dimensions – 152 × 102 × 8 mm

>>> Discover KM 1 with Possibility of a Packet Assembly