6/2020

Dear Customers and Business Partners

please find the product information and the corporate news of the June issue of our Bulletin.

MICOS Telcom Team

Attention!

The summer holiday is coming soon!

Micos Telcom will be closed from July 7 to 17, 2020 for the summer holiday.

Delivery terms may be delayed during this period.

All members of the Micos Telcom team wish you a great summer!

Did you miss our LIVE WEBINARS? No worries you can play them on below links:

Multi dwelling fiber products MDUs – Fiber from bottom to top

Micos FibeRoad™ system - modularity key to success:

Outdoor street cabinets (FDHs) – Overground easy access

INTRODUCTION

FIBREGUARD™ OPTICAL SPLICE CLOSURES

FIBREGUARD™ Closure, is a reliable and competitive solution for data, voice and video transmission. It is designed for all types of cables: ADSS, OPGW and underground, providing users with professional versatility. The FIBREGUARD™ closure can be used in many types of installations: towers, wooden or concrete poles, aerial strand, manholes, and directly buried. For all installations the appropriate fittings are available as a separately purchased kit.

• Will accommodate fusion, mechanical and ribbon splicing
• Many applications: Head end, splice box, node, cable termination point, and terminal and branch splice application
• Easy and quick installation, taking less than 10 seconds to be re-entered
• Rubber bushings – single or multiple entries, which are selected according to cable diameter
• Air and water tightness
• There is a strength member and cable fastening system for each cable entry port

They have also been designed to host different fiber management systems, and in this way they accept:

• Slide & lock splice trays (also known as book type);
• SAFEtNET® Fiber Management system for single circuit/single element applications (only FIBREGUARD™ 800 splice closures)
• Stackable COYOTE® splice trays applications
  (only FIBREGUARD™ 650 and FIBREGUARD™ 800 splice closures)

Slide & lock splice trays
The SLIDE & LOCK® Splice trays offer a simple and craft-friendly design, which allows entrance into any tray independently of its position inside the closure, as you do not have to move the trays that are immediately above. For this purpose, every tray has flip tray devices, which enable to pull up the above trays holding them in position. Simply push the tray back and pull them up until they remain in place. Then you can reach the tray you want with no risk of fibers. Additionally, the block of trays may be turned either on the right or on the left, so you can work in the fibers, not being disturbed by the holding stud. Every tray can host up to 12 or 24 fusion splices, and even upo to 72 splices with several entries, which will allow you to
make different operations like splicing, expressing fibers, segregating and storing dark fibers.